【Water-cooled Resistor】Resistor Basics and Conversion Formulas
Resistance (usually denoted by "R"), is a physical quantity. In physics, it represents the degree of obstruction that a conductor imposes on the flow of electric current.
The greater the resistance of a conductor, the greater the obstruction it causes to the current. Different conductors generally have different resistances, and resistance is a characteristic of the conductor itself. Resistance will cause changes in the flow of electrons. The smaller the resistance, the greater the flow of electrons, and vice versa. However, superconductors have no resistance.
1. Definition
The resistance value of a resistive element is generally related to temperature, material, length, and cross-sectional area. The physical quantity used to measure the extent of the resistance's sensitivity to temperature is the temperature coefficient, which is defined as the percentage change in resistance value for every 1℃ increase in temperature.
The main physical characteristic of a resistor is to convert electrical energy into thermal energy. It can also be said that it is an energy-consuming component. When current passes through it, internal energy is generated. In a circuit, resistors usually play the roles of voltage division and current division. For signals, both AC and DC signals can pass through resistors.
2. Unit
The resistance of a conductor is usually represented by the letter R. The unit of resistance is the ohm (ohm), which is abbreviated as "Ω" (a Greek letter, pronounced as "Omega"). The symbol is Ω. 1 Ω = 1 V/A. Larger units include kiloohm (kΩ) and megaohm (MΩ) (mega = million, which is 1,000,000).
KΩ (kiloohm), MΩ (megohm), their conversion relationship is as follows: When two resistors are connected in parallel, it can also be expressed as
1TΩ = 1000GΩ; 1GΩ = 1000MΩ; 1MΩ = 1000KΩ; 1KΩ = 1000Ω (that is, a thousand-fold ratio)
3. Calculation Formula
Series connection: R = R1 + R2 + R3 + Rn.
Parallel connection: Specifically, two resistors connected in parallel can also be expressed as.
Definition: Determination formula: (ρ represents the resistivity of the resistor, which is determined by its own properties; L represents the length of the resistor; S represents the cross-sectional area of the resistor).
Related Posts
Understanding Aluminum Casing Wirewound Power Resistors: Applications and Benefits